Sintered Ferrite Magnet
Sintered Ferrite Magnet is produced by sintered ceramic technology. The main compositions are SrO, BaO and Fe2O3. The ferrite magnets have very good corrosion resistant ability so no plating is needed for the magnets. With its competitive cost, the ferrite magnets can be an ideal substitute for NdFeB magnets if the volume is not to be considered. Its characteristics are as follows:Using the method of powder metallurgy production, low Relative Recoil Permeability, small magnetic permeability recovery. The coercive force is larger, and the magnetic circuit structure of the magnetic circuit is suitable for the dynamic working condition.Hard and brittle material, can be used for diamond tools for cutting.
According to different processing technology , it can be divided into isotropic and anisotropic. Isotropic magnet has lower property, but it can be magnetized through to every side of magnet; anisotropic magnet has higher property, but they only can magnetize through predesigned magnet size.
Physical property of Ferrite magnets:
项目 (Item) |
单位(Unit) |
参数范围 (Parameter Range) |
居里温度 (Curie Temperature) |
℃ |
450 |
最高工作温度 (Maximum operating temperature) |
℃ |
250 |
硬度 (Vickers Hardness) |
HV |
480-580 |
密度 (Density) |
g/cm3 |
4.8-4.9 |
剩磁温度系数 (Temperature coefficient of Br) |
%/℃ |
-0.2 |
内禀矫顽力温度系数 (Temperature coefficient of iHc) |
%/℃ |
0.3 |
Sintered Ferrite Magnet Performance and Grade:
牌号 Grade |
剩磁(Br) |
磁感矫顽力(HcB) |
内禀矫顽力(HcJ) |
最大磁能积(BH)max |
||||
mT |
KGauss |
KA/m |
KOe |
KA/m |
KOe |
KJ/m3 |
MGOe |
|
Y10T |
200~235 |
2.0~2.35 |
125-160 |
1.57-2.01 |
210-280 |
2.64-3.51 |
6.5-9.5 |
0.8-1.2 |
Y22H |
310~360 |
3.10~3.60 |
220-250 |
2.76-3.14 |
280-320 |
3.51-4.02 |
20.0-24.0 |
2.5-3.0 |
Y25 |
360~400 |
3.60~4.00 |
135-170 |
1.70-2.14 |
140-200 |
1.76-2.51 |
22.5-28.0 |
2.8-3.5 |
Y26H-1 |
360~390 |
3.60~3.90 |
200-250 |
2.51-3.14 |
225-255 |
2.83-3.20 |
23.0-28.0 |
2.9-3.5 |
Y26H-2 |
360~380 |
3.60~3.80 |
263-288 |
3.30-3.62 |
318-350 |
3.99-4.40 |
24.0-28.0 |
3.0-3.5 |
Y27H |
350~380 |
3.50~3.80 |
225-240 |
2.83-3.01 |
235-260 |
2.95-3.27 |
25.0-29.0 |
3.1-3.6 |
Y28 |
370~400 |
3.70~4.00 |
175-210 |
2.20-3.64 |
180-220 |
2.26-2.76 |
26.0-30.0 |
3.3-3.8 |
Y28H-1 |
380~400 |
3.80~4.00 |
240-260 |
3.01-3.27 |
250-280 |
3.14-3.52 |
27.0-30.0 |
3.4-3.8 |
Y28H-2 |
360~380 |
3.60~3.80 |
271-295 |
3.40-3.70 |
382-405 |
4.80-5.08 |
26.0-30.0 |
3.3-3.8 |
Y30H-1 |
380~400 |
3.80~4.00 |
230-275 |
2.89-3.46 |
235-290 |
2.95-3.64 |
27.0-32.5 |
3.4-4.1 |
Y30H-2 |
395~415 |
3.95~4.15 |
275-300 |
3.45-3.77 |
310-335 |
3.89-4.20 |
27.0-32.0 |
3.4-4.0 |
Y32 |
400~420 |
4.00~4.20 |
160-190 |
2.01-2.39 |
165-195 |
2.07-2.45 |
30.0-33.5 |
3.8-4.2 |
Y32H-1 |
400~420 |
4.00~4.20 |
190-230 |
2.39-2.89 |
230-250 |
2.89-3.14 |
31.5-35.0 |
3.9-4.4 |
Y32H-2 |
400~440 |
4.00~4.40 |
224-240 |
2.81-3.01 |
230-250 |
2.89-3.14 |
31.0-34.0 |
3.9-4.3 |
Y33 |
410~430 |
4.10~4.30 |
220-250 |
2.76-3.14 |
225-255 |
2.83-3.20 |
31.5-35.0 |
3.9-4.4 |
Y33H |
410~430 |
4.10~4.30 |
250-270 |
3.14-3.39 |
250-275 |
3.14-3.45 |
31.5-35.0 |
3.9-4.4 |
Y34 |
420~440 |
4.20~4.40 |
200-230 |
2.51-2.89 |
205-235 |
2.57-2.95 |
32.5-36.0 |
4.1-4.4 |
Y35 |
430~450 |
4.30~4.50 |
215-239 |
2.70-3.00 |
217-241 |
2.73-3.03 |
33.1-38.2 |
4.1-4.8 |
Y36 |
430~450 |
4.30~4.50 |
247-271 |
3.10-3.40 |
250-274 |
3.14-3.44 |
35.1-38.3 |
4.4-4.8 |
Y38 |
440~460 |
4.40~4.60 |
285-305 |
3.58-3.83 |
294-310 |
3.69-3.89 |
36.6-40.6 |
4.6-5.1 |
Y40 |
440~460 |
4.40~4.60 |
330-354 |
4.15-4.45 |
340-360 |
4.27-4.52 |
37.6-41.8 |
4.7-5.2 |
Applying Shapes:
形状Shape |
圆形Round/disc |
环形Ring |
方块Block |
磁瓦Arc/Segment/tile |
转子Rotor |
照片Pictures |
|
|
|
|
|
Process of Ferrite magnets manufacturing: